Do you know the TDS of your water?

What is TDS?

TDS stands for Total Dissolved Solids. Total Dissolved Solids are the total amount of charged ions, including minerals, salts or metals dissolved in water. TDS is illustrated using a measurement which is Parts Per Million or, "PPM." TDS can affect anything that consumes, lives in or uses water. TDS can even affect fish, plants, and the plumbing in your house. Water with high TDS can have a bitter metallic taste that can also be less hydrating. This can also interfere with the taste of your favorite foods such as soups and brewed drinks, such as Tea and Coffee. If your concerned about the quality of your water then the TDS needs to be tested.

How do you test the TDS in your water?

There are many tools to test the TDS in your water,
including water test kits, TDS meters, testing strips et cetera.
Here at PB&J Water
we use a handy device called the TDS EZ.

                                          

Using a TDS meter is easier than you think, follow these easy steps to test your water.

1. Remove the protective cap.

2. Turn the TDS meter on.

3. Immerse the meter into the water/solution up to the max immersion level.

4. Lightly stir the meter to dislodge any air bubbles.

5. Wait until the display stabilizes. Once the reading stabilizes (approximately 10 seconds),

    press the HOLD button to view the reading out of the water.

6. If the meter displays a flashing "x10" symbol, multiply the reading by 10.

7. After usage, shake off any excess water from your meter. Replace the cap. 

So what are common levels of TDS in water?

Below is a chart that illustrates common levels of Total Dissolved Solids.

If your concerned about the quality of your water, 

stop by PB&J Water sometime 

with a sample from your sink and we'll test it for you. 

Make sure to bring it in a glass jar, 

as plastic can compromise the true TDS of your water. 

Our shop is located at 

1921 West Acoma Blvd unit #102